Showing all 9 results

2 in stock 236

Circular distance meter, odometer

0.00 рсд 0.00 рсд with PDV20%
The circular distance meter (odometer)  is a universal measuring tool, commonly used by contractors, appraisers, farmers, real estate agents and the police. The odometer is characterized by intuitive, simple operation, and the lightweight design makes it easy to transport. The device provides measurements at distances up to 9999.9 m.  A large, legible meter  increases the comfort of reading the distance, thanks to the meter LED backlight we can take measurements at night. The foldable handle  allows the odometer to be folded limiting its size during storage or transport.

 

Characteristics:
• Lightweight design
• Large readable meter
• LED meter backlight
• Foldable handle
• Measurements up to 9999.9m
Data:
• Dimensions unfolded: 870x340x710mm
• Dimensions after folding: 540x360x110mm
•  Weight: 400 g
Elements of the set:
• Transport bag
• Circular meter
6 in stock 225

Cleaner for fiber optic connectors SC / ST / FC 2.5mm

0.00 рсд 0.00 рсд with PDV20%
The T-PC.2.5 internal connector cleaner is a tool for cleaning optical fiber connectors / sockets.
Thanks to the small dimensions, it is possible to clean hard-to-reach connectors.
The cleaning itself is quick and easy by pressing the device.
Cleaning does not require the use of alcohol. The process itself is done by moving the thread, made of microfiber and having anti-static properties, so that no dirt appears on the connector.
Basic features:
Model: T-PC.2.5-1.5
For connectors: SC, ST, FC (2.5mm)
Performance: up to 750 cleanings
Antistatic properties.
Easy to clean.
Dimensions: 164 x 17.5 x 17.5mm
4 in stock 226

Cleaner for LC 1.25mm fiber optic connectors

0.00 рсд 0.00 рсд with PDV20%
The T-PC.1.25 internal connector cleaner is a tool for cleaning optical fiber connectors / sockets.
Thanks to the small dimensions, it is possible to clean hard-to-reach connectors.
The cleaning itself is quick and easy by pressing the device.
Cleaning does not require the use of alcohol. The process itself is done by moving the thread, made of microfiber and having anti-static properties, so that no dirt appears on the connector.
Basic features:
Model: T-PC.2.5-1.5
Suitable for connectors: LC (1.25mm)
Performance: up to 750 cleanings
Antistatic properties.
Easy to clean.
Dimensions: 164 x 17.5 x 17.5mm
2 in stock 224

FRP fiberglass remote control for pulling cables Ø6mm, 75m

0.00 рсд 0.00 рсд with PDV20%

Remote control for pulling cables made of fiberglass FRP with a diameter of 6 mm and a length of 75 meters placed on a special stand to facilitate its development. Fiber with high elasticity and resistance to bending and tearing, coated with yellow PE plastic, which has a protective function and provides good sliding properties. Fiber frame powder-coated in blue, equipped with a manual brake blocking the drum, and a special “eye” to guide the fiber. The design of the stand ensures functional transport, storage and use. Fiber tip ended with a guide head.

Application:
– Pulling cables between telecommunication chambers
– Cable pushing under roads
– Installations in suspended ceilings
– Cleaning, clearing pipes, culverts, sewage systems
– Entering cables into casing pipes

Technical data:
– Dimensions: 56x18x68 cm
– Outer diameter (with cover): 6 mm
– Length: 75 m
– Weight (with frame): approx. 4.2 kg
– Weight including packaging: approx. 4.6 kg

Out of stock 243

Laser light source – fault locator 5km T-VF201

0.00 рсд 0.00 рсд with PDV20%

T-VF201 is a laser device used for quick and easy testing of fiber optic track continuity.
The device is powered by two AA batteries, or via a power supply.
The device is sold with a protective cover.

Technical data:

Wavelength: 650nm
Output power:> 1mW
Length of test section up to: 5km
Connector: 2.5mm FC and UPC
Power supply: 2xAA
Weight: 80g
Battery life: 100 hours
4 in stock 320

Steel banding band

0.00 рсд 0.00 рсд with PDV20%
The I-NAP-004  band is a ratchet tool used for tensioning and cutting the stainless steel tape used to mount accessories, holders and other fiber optic line construction accessories, i.e. post brackets, post holders, cable rack, etc.
Has a built-in knife for cutting the tape. The cut-out pin makes tensioning to the required tension very much easier.
After fixing the tape in the prepared cut-out, we stretch the tape by winding it around the pin, obtaining the maximum tension of the tape, and then cut it to the appropriate length, thus preparing for the completion of assembly.
Works with stainless steel strips, including 10-20mm wide. It is characterized by high tensioning force.
5 in stock 319

Steel banding band I-NAP-003

0.00 рсд 0.00 рсд with PDV20%
The I-NAP-003 banding is a standard tool used for tensioning and cutting a stainless steel strip used to mount accessories, holders and other fiber optic line construction accessories, i.e. post supports, post holders, cable holders, etc.
Has a built-in knife for cutting the tape. The spring gripper improves ease of use.
After fixing the tape, by unscrewing the screw we obtain the maximum tension of the tape, and then cut it to the appropriate length, thus preparing for the completion of assembly.
Works with stainless steel strips, including 10-20mm wide. It is characterized by high tensioning force.
8 in stock 317

Steel strip, 50 m (20×0.7 mm)

0.00 рсд 0.00 рсд with PDV20%

TELCOLINE I-TS-C201-50 steel strips they are used to create solid fastening bands in many industries. The tapes are made of corrosion-resistant and weatherproof stainless steel, packaged in coils of 50m in a durable plastic packaging with a practical handle. They are an ideal solution for fastening and fastening requiring high strength, strength and durability. Packing in practical containers allows you to adjust the length of the tape section to the specific requirements of your work, reducing the amount of unnecessary waste. The properties of TELCOLINE tapes ensure their long life and resistance to harmful weather conditions, including low and high temperatures, UV radiation. They are resistant to tearing and stretching, they tolerate heavy loads and vibrations well.

Characteristics / application:
– Stainless steels
-Compact housing with a handle for easy unwinding and moving the tape
-Installation of overhead network components such as brackets, handles, hooks
-Possible application in various industries: telecommunications, energy, mining, road, transport, agriculture, forestry, construction, industry (chemical, petrochemical, military, electrical, automotive)
29 in stock 242

TELCOLINE T-T3 stripper with 3 holes

0.00 рсд 0.00 рсд with PDV20%

Stripper is the basic tool for fiber optics installer. The presented model has 3 holes to remove the buffer and other external coatings of the fiber optic cable without damaging the fiber.

The holes allow you to remove:

– outer shell 2-3mm,

– 900 μm  to 250  μm buffer  ,

– 250 μm to 125  μm varnish  ,